SilGrip™ PSA610 压敏胶
With its virtually residue-free removability, SilGrip PSA610 silicone pressure-sensitive adhesive has shown to be an excellent choice for use in the manufacture of industrial pressure-sensitive tapes. It offers a good balance of tack and peel, and the toluene solution of polysiloxane gum and resin can adhere well to a wide variety of surfaces.
PSA610 silicone pressure-sensitive adhesive is a toluene solution of polysiloxane gum and resin. It is supplied at 60 percent silicone solids and can be further diluted with aromatic, aliphatic or chlorinated solvents. PSA610 can also be blended with SR545 resin dispersion or with other methyl-based silicone pressure-sensitive adhesives to obtain specific performance properties. PSA610 adhesive is used as a coating onfilm and fabric substances in the manufacture of industrial pressure-sensitive tapes. Typical applications include tapes for electrical insulation, electronic assembly masking, flame and plasma spray masking, EMI/RFI shielding, and splicing operations.
Key Features and Typical Benefits
- Wide temperature range performance, maintains good shear and tack properties at intermittent temperatures up to 550 ºF
- Adhesion to a wide variety of surfaces including low energy surfaces (silicones, fluoropolymers, polyolefines)
- Resistance to moisture, weathering (ozone, sunlight), chemical (acids, alkalis, oils) and biological (fungus) attack
- Minimum silicone residue on applied surfaces (e.g. printed circuit boards)
- Excellent balance of tack and peel adhesion properties
SilGrip™ PSA610 压敏胶에 대한 자세한 정보
SilGrip PSA610 adhesive is a pressure-sensitive adhesive that is used in the manufacture of electronic masking tapes, offering easy removal with minimal silicone residue on applied surfaces.
SilGrip PSA610 pressure-sensitive adhesive can perform at both high and low temperatures and maintain shear strength and tack at intermittent temperatures up to 550° F. Its resistance to moisture, weathering, sunlight, ozone, fungus and a range of chemicals equips it with outstanding durability to perform in a variety of automotive and electronics applications - including electrical insulation tapes, plasma spray masking, EMI and RFI shielding, and splicing operations. It can also bond extremely well to low-energy surfaces such as silicones, fluoropolymers and polyolefin without sacrificing tack.
SilGrip PSA610 pressure-sensitive adhesive can be diluted with aromatic solvents to achieve a desired coating viscosity, or blended with other methyl-based silicone pressure-sensitive adhesives to obtain specific performance properties.
Potential applications for SilGrip PSA610 pressure-sensitive adhesive include:
- Electronic masking tape
- Heat seal tape
- Electrical tape
* SilGrip is a trademark of Momentive Performance Materials Inc.
