Momentive
Americas
|

 Applications
 Boron Nitride Paints
 Boron Nitride Powder
 Carbide Coatings
 Graphite Monochromators
 Heaters & Heater Assemblies
 High Thermal Conductivity Graphite & Composites
 Hot Pressed Boron Nitride Composites
 Hot Pressed Boron Nitride Shapes
 Pyrolytic Boron Nitride
 Pyrolytic Graphite
 Titanium Diboride Powder
 Product Literature

 Technical Articles & Data
 Order Center
 Order a Sample
 Strongsville AS 9100 Certificate
 Global ISO 9001 Certificate

Boron Nitride (BN) Paints

  

Boron Nitride Paint and Spray

 

Momentive offers boron nitride (BN) in a ready-to-use coating form as BN aerosol spray and a range of water based paints.

 

 

 Typical Properties of BN Paints

   Color 

   White 

   Normal Use 
   Temperature

   850°C – Oxidizing

   1800°C – Inert/Vacuum

   (Boron Nitride Component) 

   Reactivity

   Nonreactive 

   Toxicity

   Nontoxic – coating which has been

   allowed to dry properly is nontoxic 

   Electrical Resistivity

   >1x1015 ohm-cm –typical
   (Boron Nitride Component) 

   

 

Boron Nitride Spray

  • High purity, extremely fine BN crystals in a fast drying, solvent-based carrier
  • Supplied in 13oz. aerosol cans, shipped in 12-can cartons
  • Each can provides about 100 sq. ft. of coverage
  • Produces a smooth coating with very low binder content

Boron Nitride Water Based Coatings

  • Available in one and five gallon containers
  • Apply by brush, roller, dipping or spraying using various commercially available methods
  • Dilution (2:1 water to concentrate) is recommended to enhance application (GPC, LPC)
  • EPC is formulated to be ready-to-use (Dilution not recommended)
  • FPC is a ready-to-use dispersion of BN and alumina
  • Coatings can be applied to hot or cold surfaces (Water based coatings on surfaces greater than 100°C is not recommended)
  • Dried coatings can be readily handled, smoothed or polished with a soft, dry cloth
  • Forced drying at 80°C for 20 minutes is recommended for each layer

 

  Grade 

Contents

%Solids

GPC

BN

>25%

EPC

BN

>10%

FPC

BN/AL2O3

>15%

LPC

BN/AL2O3

>25%

FPD

BN/AL2O3

Dry powder,

mix with water

at point of use

 

 

 

  

Contacts

Contacts for Americas
[Choose Region]
Object reference not set to an instance of an object.